Gypsum Based Dry Mix - White or Coloured Skim Coat

Esa-one EL800

Esa-one EL800 is a binder based on minerals and natural or synthetic polymers, soluble in water. It has been specially developed for the additivation of finishing plasters based on gypsum or calcium carbonate, applied on interior walls.

Physical and chemical characteristics:

• Chemical nature: binder based on synthetic and natural polymers
• Aspect: fine powder
• Praticle size distribution: below 1% at the sieve 200um
• Solubility: total in cold water

Request a sample Make an enquiry

Esa-one Finish XL

Esa-one Finish XL is a binder based on minerals and natural or synthetic polymers, soluble in water. It has been specially developed for the additivation of a finishing plasters based only on calcium carbonate, applied on building walls.

Physical and chemical characteristics:

• Chemical nature: binder based on synthetic and natural polymers
• Aspect: fine powder
• Pratical size distribution: below 1% at the sieve 200um
• Solubility: total in cold water
• Set time: no set, drying

Request a sample Make an enquiry

Esacol 50D1

Esacol 50D1 is a hydro-colloid soluble both in hot and cold water. Special modifications make it suitable as a thickener and a water retentive agent.

Chemico-physical characteristics:

• Chemical description: non-ionic modified polysaccharide
• pH: 6.0-8.0 (2% w/w water sol)
• Appearance: free-flowing ivory powder
• Moisture: < 4%
• Bulk density: 0.60-0.80 g/ml
• Particle size: 99.9% < 35 mesh
• Solubility: complete in hot and cold water
• Brookfield RVT viscosity: 8000 – 10000 mPa*s (2% w/w solution, 20’C, 20 rpm)

Applications and dosages

Gypsum/lime plasters:

0.15-0.30%

Cement/lime plasters:

0.15-0.30%

Request a sample Make an enquiry

Esacol 60H1

Esacol 60H1 is a hydro-colloid soluble both in hot and cold water. Special modifications make it suitable as a thickener and a water retentive agent.

Chemico-physical characteristics:

• Chemical description: non-ionic modified polysaccharide
• pH: 6.0 – 8.0 (2% w/w water sol.)
• Appearance: free-flowing ivory powder
• Moisture: < 4%
• Bulk density: 0.6 – 0.8 g/ml
• Particle size: 99.9% < 35 mesh
• Solubility: complete in hot and cold water
• Brookfield RVT viscosity: 9000 – 12000 mPa*s (2% w/w solution, 20’C, 20 rpm)

Applications and dosages

Gypsum/lime plasters:

0.15-0.30%

Cement/lime plasters:

0.15-0.30%

Request a sample Make an enquiry

Esacol HS 26 S

Esacol HS 26 S is a hydrocolloid belonging to the polysaccharides family, both in hot and cold water, suitable as thickener, rheology modifier and water retention agent.

Chemico-physical characteristics:

• Chemical description: non-ionic modified polysaccharide
• pH: 6.0 – 8.0 (2% w/w water sol.)
• Appearance: ivory-flowing powder
• Moisture: < 3.4%
• Bulk density: 0.6 – 0.8 g/ml
• Particle size: 99.9% < 35 mesh
• Solubility: complete in hot and cold water
• Brookfield RVT viscosity: 8000 – 11000 mPa*s (2% w/w solution, 20’C, 20 rpm)

Applications and dosages

Gypsum/lime plasters:

0.15-0.30%

Cement/lime plasters:

0.30-0.50%

Request a sample Make an enquiry

Esacol MX 110

Esacol MX 110 is a thickener/water retention agent coming from natural raw materials, designed to improve the workability and the ease of spreading gypsum-based plasters. Can be easily mixed with all other additives. The high pseudo-plasticity of this special modified polysaccharide leads to very good flowing ability into the spray machine’s pipes.

Chemico-physical characteristics:

• Chemical description: non-ionic modified polysaccharide
• pH: 6.0 – 8.0 (2% w/w water sol.)
• Appearance: free-flowing ivory powder
• Moisture: < 4%
• Bulk density: 0.6 – 0.8 g/ml
• Particle size: 80% < 140 mesh
• Solubility: complete in hot and cold water
• Brookfield RVT viscosity: 6000 – 8000 mPa*s (2% w/w solution, 20’C, 20 rpm)

Applications and dosages

Gypsum/lime plasters:

0.16-0.30%

Request a sample Make an enquiry

Esamid Range

Esamid Products are chemically modified starch ethers, developed as special thickeners for the application in the building field. Products should be combined with rheology modifiers, water retention and air entraining agents of the esacol and esapon range.

Chemical-physical characteristics

Chemical description:

• Esamid NA: etherified starch
• Esamid HP: etherified starch
• Esamid TC: etherified starch

pH:

• Esamid NA: 10-12 (5% w/w water sol)
• Esamid HP: 7.0 – 10.5 (5% w/w water sol)
• Esamid TC: 6-8 (5% w/w water sol)

Appearance:

• Esamid NA: white powder
• Esamid HP: white powder
• Esamid TC: white powder

Moisture:

• Esamid NA: max 7%
• Esamid HP: max 7%
• Esamid TC: max 7%

Solubility:

• Esamid NA: complete in hot and cold water
• Esamid HP: complete in hot and cold water
• Esamid TC: complete in hot and cold water

Brookfield RVT viscosity:

• Esamid NA: 800 – 1400 mPa*s (5% w/w water sol, 20’C, 20 rpm)
• Esamid HP: 300 – 700 mPa*s (5% w/w water sol, 20’C, 20rpm)
• Esamid TC: 800 – 1200 mPa*s (5% w/w water sol, 20’C, 20 rpm)

Application and dosages:

Gypsum/lime based plaster:

0.02%

Gypsum stucco and tile grout:

0.02%

Tile adhesive:

0.02%

Cement/lime based plaster:

0.02%

Request a sample Make an enquiry

Esapon 1850 C

Esapon 1850 C is a surfactant for gypsum and/or cement-based plasters able to introduce efficiently the air into these systems during mixture preparation. Product should be used in combination with the water retention agents and the rheological modifiers of the esacol and esamid range.

Chemico-physical characteristics:

• Chemical description: ethoxylated alcohol
• Appearance: fine white powder
• pH: 6.0 – 7.5 in water solution (5% w/w)
• Bulk density: 0.3 – 0.4 g/cm3
• Particle size: 98% > 500 micron ASTM
• Solubility: complete

Applications and dosages

Cement plaster:

0.01%

Gypsum plaster:

0.01%

Coloured cement finishing plaster:

0.01-0.02%

Tile grout:

0.01%

Request a sample Make an enquiry

Esapon 1851

Esapon 1851 is a surfactant for gypsum and/or cement-based plasters able to introduce efficiently the air into these systems during mixture preparation. Product should be used in combination with the water retention agents and the rheological modifiers of the esacol and esamid range.

Chemico-physical characteristics:

• Chemical description: etoxylated alcool
• Appearance: fine white powder
• pH: 6.0 – 7.5 in water solution (5% w/w)
• Bulk density: 0.3 – 0.4 g/cm3
• Particle size: 95% < 630 micron ASTM
• Solubility: complete

Applications and dosages

Cement plaster:

0.01%

Gypsum plaster:

0.01%

Coloured cement finishing plaster:

0.01-0.02%

Tile grout:

0.01%

Request a sample Make an enquiry